Rare earth elements (REEs) are found together in mineral deposits, which are then separated from one another to use only the REEs needed for manufacturing. Rare earth elements are uniquely difficult, as some—such as cerium—are abundant in mineral deposits and not used widely. Others–such as neodymium—are widely used in clean energy technologies, but much less abundant. This challenge is often referred to as the rare earth balance problem.
The US Department of Energy’s (DOE) Advanced Materials and Manufacturing Technologies Office (AMMTO) and Critical Materials Institute (CMI), an Energy Innovation Hub, are working to address this problem by finding new ways to use cerium that will shore up market demand for an abundant REE and create more value from domestic rare-earth mining operations.
CMI paired cerium with aluminum to create Aluminum Cerium (Al-Ce) alloys with tailored-properties and unlocked an array of new applications for the REE. (Earlier post.) In 2020, recognizing the achievements of the alloy, the Aluminum Association awarded the official designation of this new class of Al-Ce alloys. This designation allows for the launch of global industrial applications and creates more opportunities for industry to produce the alloys using the designations and enabling CMI commercialization.
Over time, CMI has added several projects to its portfolio of Al-Ce alloys to boost scale-up, licensing, and commercialization efforts. These projects, supported by AMMTO, bring together the advanced expertise of researchers from CMI, DOE’s National Labs, and universities. The various development projects in CMI and scale-up of processing has received significant support from Eck Industries, an aluminum foundry in Wisconsin which signed an exclusive license with CMI to commercialize the Al-Ce alloys.
Finding uses for cerium supports domestic rare-earth mining operations and provides innovative materials to US manufacturers. The Al-Ce alloys developed by CMI have proven to be adaptable, lightweight, resistant to corrosion, and stable in temperatures up to 500℃. Furthermore, there are reductions in energy and emissions associated with the production of the Al-Ce alloy, because it doesn’t require heat treatment, an energy-intensive process to soften metals and improve formability. So far, the alloy has been used across a diverse range of applications including cylinder heads, turbo chargers, and turbine blades for hydroelectric turbines, pistons, and rotors.
The impacts of the Al-Ce alloy are significant:
A new market is created for cerium which addresses the rare earth balance problem where economic value is spread over a broader set of REEs beyond just the magnet REE. Increases in market demand then drives production of critical rare earth elements needed for magnets.
Due to the alloys unique microstructure and resulting properties, Al-Ce alloy can be used to reduce energy use across multiple large-scale transportation applications.
Current projects moving Al-Ce alloys closer to commercialization include:
Science-Enabling Diverse Value Chain Product From Aluminum-Cerium Alloys; Led by Orlando Rios, University of Tennessee – Knoxville. This project explores the targeting of specific issues that would enable the deployment of a stronger Al-Ce alloy at high temperature, high ductility, and lower cost. The alloy is used in high-performance applications such as pistons, turbochargers, and cylinder heads.
The team used combinatorial sputtering, a process where large numbers of chemically distinct film samples can be made into a single deposition. This discovery allowed the team to create large libraries that expounded, clearly, on classes of alloys that either showed promising leads, or were dead ends. The team was particularly interested in materials with small coefficients of thermal expansion (CTE), as material changes react to temperature by either shrinking or expanding.
Two key findings resulted from these efforts:
The team found cerium to be an effective alternative to silicon in aluminum casting alloys across foundry manufacturing; and
The team identified large classes of Al-Ce alloys with low CTEs at high operating temperatures.
Both findings will help to diversify the REE supply chain and encourage industry adoption of REEs.
Upon successful development, this technology will improve economic competitiveness and provide domestic demand streams for aluminum alloys.
Accelerated Alloy Deployment And Rapid Assessment; Led by Ryan Ott, Ames National Laboratory. This project is working to enhance usage of elements that are overly produced, such as cerium, and decrease usage of critical elements, such as neodymium. The project is also investigating enabling technologies, such as additive manufacturing for critical materials, to allow the US to be more competitive. The team is also working to accelerate the time frame that materials and technologies are developed.
This project works on developing and finding new pathways for materials and manufacturers. These efforts include the development of cost-effective high-performance magnets, and high-temperature Al alloys that use rare earth mining by-products. The team used a process that blended 3D printing, combi-arc melting, and thin film deposition to synthesize alloys.
Al-Ree Alloy Development For Advanced Manufacturing (AL-REE ADAM); Led by Hunter Henderson, Lawrence Livermore National Laboratory (LLNL). Working to correct the rare earth supply and demand imbalance, this project is looking to develop high-volume and high-value applications for overproduced cerium. The project features high value-added aluminum-cerium-based alloys, which would open the market to early adopters and diversify future cerium demand.
This project demonstrated that metal 3D printing of aluminum rare-earth element (Al REE) alloy forms an internal degradation-resistant nanostructure. It also established the enhanced thermal performance of Al-REE alloys—proving eligibility for high-temperature applications previously unavailable to other Al alloys. This would greatly increase demand for the underutilized REE cerium.
The current alloy used in aerospace and defense components is Al Alloy 2618-T6. The team found the Al-Ce alloy outperformed that alloy, and at a high temperature. This development could garner industrial interest—increasing uses for cerium and diversifying REE supply chain efforts. The team will scale-up for demonstration and continue to improve performance at room temperature strength.
Cerium Gettering Of Copper And Iron In Aluminum Alloy Recycling; Led by Ryan Ott, Ames National Laboratory. This project is exploring improvement of energy efficiency and economics of aluminum recycling through overly produced rare earth mining by-products, such as cerium. Research has demonstrated that the addition of small amounts of cerium to aluminum has increased alloy tolerances to impurities (copper and iron) and improved overall corrosion resistance. These additions also allow for lower quality aluminum to be used in the production of high-value alloys, reducing the need for both energy and cost intensive high-purity aluminum additions.
Research continues in opportunities that would compound cerium deterioration benefits with the focused addition of aluminum.
Posted on 10 February 2023 in Market Background, Materials | Permalink | Comments (1)
Al/Cerium can be used in SOFCs
Posted by: SJC | 11 February 2023 at 05:32 AM
This is only a preview. Your comment has not yet been posted.
The letters and numbers you entered did not match the image. Please try again.
As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.
Having trouble reading this image? View an alternate.
(You can use HTML tags like <b> <i> and <ul> to style your text.)
(Name is required. Email address will not be displayed with the comment.)
Name is required to post a comment
Please enter a valid email address
This weblog only allows comments from registered users. To comment, please enable JavaScript so you can sign in.